|
A copper indium gallium selenide solar cell (or CIGS cell, sometimes CI(G)S or CIS cell) is a thin-film solar cell used to convert sunlight into electric power. It is manufactured by depositing a thin layer of copper, indium, gallium and selenide on glass or plastic backing, along with electrodes on the front and back to collect current. Because the material has a high absorption coefficient and strongly absorbs sunlight, a much thinner film is required than of other semiconductor materials. CIGS is one of three mainstream thin-film PV technologies, the other two being cadmium telluride and amorphous silicon. Like these materials, CIGS layers are thin enough to be flexible, allowing them to be deposited on flexible substrates. However, as all of these technologies normally use high-temperature deposition techniques, the best performance normally comes from cells deposited on glass. Even then the performance is marginal compared to modern polysilicon-based panels. Advances in low-temperature deposition of CIGS cells have erased much of this performance difference. Thin-film market share stagnated at around 15 percent, leaving the rest of the PV market to conventional solar cells made of crystalline silicon. In 2013, the market share of CIGS alone was about 2 percent and all thin-film technologies combined fell below 10 percent.〔(Photovoltaics Report, Fraunhofer ISE, July 28, 2014, pages 18,19 )〕 CIGS cells continue being developed, as they promise to reach silicon-like efficiencies, while maintaining their low costs, as is typical for thin-film technology.〔 〕 Prominent manufacturers of CIGS photovoltaics were the now-bankrupt companies Nanosolar and Solyndra. Current market leader is the Japanese company Solar Frontier, producing solar modules free of any heavy metals such as cadmium or lead.〔(【引用サイトリンク】work=Solar Frontier )〕 == Properties == CIGS is a I-III-VI2 compound semiconductor material composed of copper, indium, gallium, and selenium. The material is a solid solution of copper indium selenide (often abbreviated "CIS") and copper gallium selenide, with a chemical formula of CuInxGa(1-x)Se2, where the value of x can vary from 1 (pure copper indium selenide) to 0 (pure copper gallium selenide). It is a tetrahedrally bonded semiconductor, with the chalcopyrite crystal structure. The bandgap varies continuously with ''x'' from about 1.0 eV (for copper indium selenide) to about 1.7 eV (for copper gallium selenide). CIGS has an exceptionally high absorption coefficient of more than 105/cm for 1.5 eV and higher energy photons.〔 CIGS solar cells with efficiencies around 20% have been claimed by the National Renewable Energy Laboratory (NREL), the Swiss Federal Laboratories for Materials Science and Technology (Empa), and the German ''Zentrum für Sonnenenergie und Wasserstoff Forschung'' (ZSW), which is the record to date for any thin film solar cell.〔(ZSW: Press Releases ). Zsw-bw.de. Retrieved on 2011-09-13.〕 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「copper indium gallium selenide solar cells」の詳細全文を読む スポンサード リンク
|